Creating a Coffee Mug Using Fusion 360: One of the Simplest Things to Do!
DESCRIPTION
Fusion is something anyone can use to make anything, so did I. What can be more common that a coffee mug? Follow the screencast to see how I did it or just follow these steps.
Step 1: Creating the Body
Description:
2 More Images
- Create a cylinder
- Diameter= 60mm
- Height= 40mm
- Create a sketch on a lateral side using any of the central planes as the sketch plane
Create a sketch on the top side
Use Loft and join the part
Use shell to make it hollow (Inside: 2mm)
Step 2: Creating the Handle
Description:
2 More Images
- Create a profile of the handle on the other side of the plane you used for creating the mouth, Sketch the geometry using "Spline" Command
- Create a construction plane to the opposite side of the plane you used for creating the mouth (offset= half the diameter= 30mm)
- Create two circles on this construction plane at two ends of the spline
- Use loft command to make the handle and join it to the body
Step 3: Giving It a Nice Look
Description:
3 More Images
- Add Physical material (Porcelain)
- Add Appearance to the body and the faces (Time to use your creativity!)
- Add decals of your choice, the decals I used are:
- Autodesk
- Fusion 360
- Instructables
- Even my own picture ;)
- Edit some scene settings
- Change the environment
Step 4: Get the Rendering and Share Them!
Description:
Save the file and it'll automatically start rendering.
Hey, why not share them here?
Click on the "I Made It" button and show your design to everyone!