EMP Generator DIY

i must put the coil and pcb together

i use a 9v battery socket,and cut it in the middle,so i can use the 9v battery as the power

make some hole on the box,and put the coil on the head,add a switch,so i can click switch to start EMP

sc2078,it be used for drive the coil

i use 3pcs battery,but i think use 5pcs is better,over 36v is dangerous,so i just use 3pcs

i add an antenna on the head,i think it is better for enhance the EMP,but i am not sure about this