How to Repair Led Bulb
DESCRIPTION
In this instructables I will show you how to repair led bulb
Step 1: Remove the Top Cover
Description:
Remove the top cover (diffuser) then desolder two wires of ac mains from the board.
Step 2: More Details in Video
Description:
Step 3: Check All Led
Description:
Set your multimeter to continuity mode then place your positive lead to positive side of the led and negative lead to negative side of the led. Mark the faulty and led.
Step 4: Remove the Led
Description:
Desolder the led carefully.
Step 5: Take a New Led
Description:
Step 6: Solder New Led
Description:
Step 7: Replace the Capacitor
Description:
In the backside you can see two capacitors one is electrolytic and another one is polyester capacitor. Replace that 47mfd/63v electrolytic capacitor with new one.
Step 8:
Description:
