Make PCB Arduino Componen Tester V07
DESCRIPTION
special thx for
my reference :
http://forum.arduino.cc/index.php?topic=164112.0 https://blog.adafruit.com/2013/05/02/ardutester-a...http://forum.arduino.cc/index.php?topic=164112.0 http://nicuflorica.blogspot.co.id/2015/04/ardutes...
Frot above link i have this schematic, then i try to make it on Arduino UNO R3 DIP IC.
Then if i use Arduino UNO R3 Board, this is not effectiv for this tester. So i make PCB. i used PCB wizard Program to make this PCB.
I used HP P1102 printer laser jet, and ii print on Glossy Paper 120 Gram.
2 More Images
I used Iron to trasfer PCB layout from glossy paper to PCB. this about 4-5 minutes for iron. (you must have feeling to do this). Then release the glossy paper. The Toner can put on PCB. and ready for Etching.
After etching clean toner with Thinner/gassoline, you can have nice PCB.
3 More Images
You can Put this sketch on Arduino Board, then pick up your IC 328 from arduino board, then put on your New PCB. For simple you can put the LCD display behind the pcb.
Download this project this link
complete step you can visit my website : http://www.rokhmad.com/2016/04/membuat-esr-meter-d...
and watching the video on :